Table of Contents
Advertisement
Quick Links
User Manual
C27F581FD* C27H580FD*
The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
•
An administration fee may be charged if either
‒ (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
‒ (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
•
The amount of such administration charge will be advised to you before any work or home visit is carried out.
Advertisement
Table of Contents
Related Manuals for Samsung C27F581FD Series
Summary of Contents for Samsung C27F581FD Series
- Page 1 © Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than that of Samsung Electronics are owned by their respective owners.
-
Page 2: Table Of Contents
Before Using the Product Connecting and Using a Source Device Screen Setup Securing the Installation Space Read below before installing the monitor. SAMSUNG MAGIC Bright Precautions for storage Connecting and Using a PC Brightness Safety Precautions Connection Using the D-SUB Cable (Analog Type) 18... - Page 3 Table of contents Setup and Reset Troubleshooting Guide FreeSync Requirements Before Contacting Samsung Customer Service Center Eco Saving Plus Testing the Product Checking the Resolution and Frequency Off Timer Check the following. PC/AV Mode Q & A Source Detection Key Repeat Time...
-
Page 4: Before Using The Product
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.) -
Page 5: Cleaning
• Do not disconnect the power cord while the product is being used. • Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • Keep the power socket where the power cord is connected unobstructed. -
Page 6: Installation
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result. -
Page 7: Operation
There is a high voltage inside the product. Never disassemble, repair or modify the product ‒ Be sure to power off the product and disconnect the power cord when water or other foreign yourself. substances have entered the product. Then contact Samsung Customer Service Center. ‒ Contact Samsung Customer Service Center for repairs. •... - Page 8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause • Do not touch the screen when the product has been turned on for an extended period of time as it afterimage burn-in or defective pixels. will become hot.
-
Page 9: Preparations
Chapter 02 Preparations Parts Icons Description Multi directional button that helps navigate. ― The JOG button is located on the rear left side of the product. The JOG Button button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ―... -
Page 10: Direct Key Guide
Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ― The function buttons page shows if Eye Saver Mode is enabled. -
Page 11: Function Key Guide
• Picture Game Mode, Bright, Brightness, Color SAMSUNG MAGIC • System Eco Saving Plus Selects to turn the Monitor off by moving the JOG button in the function key guide screen. ― Actual models because of functional variation, Function key guide options will be different. - Page 12 When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode Source Change Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below. JOG Button Action UP/DOWN...
-
Page 13: Changing Brightness, Contrast And Sharpness Settings
― This menu is not available when Bright is set to Dynamic Contrast mode. SAMSUNG ― What is Auto Mute? MAGIC ― This menu is not available when Eco Saving Plus is enabled. The function mutes the audio to improve sound effect when there is sound noise or when the input ―... -
Page 14: Reverse Side
Reverse Side Adjusting the Product Tilt ― The color and shape of parts may differ from what is shown. Specifications are subject to change without ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -
Page 15: Anti-Theft Lock
Anti-theft Lock Precautions for moving the monitor ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: •... -
Page 16: Installation
Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. Place the protective Styrofoam (cushion) included in Attach the stand base to the stand neck, and then the package on the floor and place the product facing... -
Page 17: Removing The Stand
Removing the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. Place the protective Styrofoam (cushion) included in While holding the monitor, pull and remove the stand the package on the floor and place the product facing... -
Page 18: Connecting And Using A Source Device
Chapter 03 Connecting and Using a Source Device Read below before installing the monitor. Connecting and Using a PC Check the shapes of both ends of the cables that came with the monitor, and check the shapes and Select a connection method suitable for your PC. ―... -
Page 19: Connection Using The Hdmi Cable
Connection Using the HDMI Cable Connection Using an DP Cable Check to make sure that the power cables for the monitor and external devices, such as Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. -
Page 20: Connecting The Power
Correct posture to use the product Connecting the Power Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. -
Page 21: Driver Installation
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. -
Page 22: Screen Setup
Chapter 04 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. SAMSUNG MAGIC Bright In PC mode • Custom: Customize the contrast and brightness as required. -
Page 23: Brightness
You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. SAMSUNG Bright is set to Cinema, Dynamic Contrast Basic Color mode. -
Page 24: Samsung Magic Upscale
SAMSUNG MAGIC Upscale Eye Saver Mode Upscale function can enhance the layers of the picture details and the vividness of the picture. Set to an optimum picture quality suitable for eye relaxation. SAMSUNG MAGIC The function has more obvious effects on low-resolution pictures. -
Page 25: Picture Size
Picture Size Screen Adjustment Change the picture size. This menu is available in Analog mode only. ― This menu is only available when Picture Size is set to Screen Fit Mode. In PC mode When a 480P or 576P or 720P or 1080P signal is input in mode and the monitor can display normally, select Screen Fit... -
Page 26: Adjusting Osd (On Screen Display) Settings
Chapter 05 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. Transparency Position Set the transparency for the menu windows. Adjust the menu position. OnScreen Display Configure the transparency Language 한국어... -
Page 27: Setup And Reset
The response rate during the game may fluctuate depending on the resolution. A higher resolution generally decreases the response rate. • The sound quality of the monitor may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Center. - Page 28 The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards: Make sure to install the latest official graphics drivers from AMD that support FreeSync. ―...
-
Page 29: Eco Saving Plus
PC/AV Mode to AV. The picture size will be enlarged. the monitor panel. This option is useful when you view a movie. ― This option is not available when SAMSUNG Bright is in Dynamic Contrast mode. •... -
Page 30: Power Led On
Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product. • Working: The power LED is on when the product is turned on. • Stand-by: The power LED is on when the product is turned off. Reset All Return all the settings for the product to the default factory settings. -
Page 31: Installing The Software
Windows 7 32Bit/64Bit Easy Setting Box enables users to use the monitor by partitioning multiple sections. • Windows 8 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at • Windows 8.1 32Bit/64Bit http://www.samsung.com. -
Page 32: Troubleshooting Guide
Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. - Page 33 Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or Playback of high-definition large video files can be choppy. This may be because the video player is frequency for the product.
-
Page 34: Q & A
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel Appearance and Themes Display Settings... -
Page 35: Specifications
Power Supply AC 100 - 240 V - (+/- 10 %), 50/60 Hz ± 3 Hz ― For detailed device specifications, visit the Samsung Electronics website. Refer to the label at the back of the product as the standard voltage can vary in different countries. -
Page 36: Standard Signal Mode Table
Standard Signal Mode Table Synchronization Horizontal Frequency 30 – 81 kHz Vertical Frequency 56 – 72 Hz Resolution Optimum resolution 1920 x 1080 @ 60 Hz Maximum resolution 1920 x 1080 @ 60 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. - Page 37 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1920 x 1080 67.500 60.000 148.500 ― Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.
-
Page 38: Appendix
• Use of supplies or separatly sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...