Settings And Adjustments; Using The Setup Display; Setting The Display Or Sound Track Language (Language Setup); Settings For The Display (Screen Setup) - Sony DVP-NS775V Service Manual

DVP-NS775V/NS780V
Controlling the volume of your
AV amplifier (receiver) with the
remote
TV/DVD
switch
"/1
VOL +/–
Number
buttons
1
Slide the TV/DVD switch to DVD.
2
Hold down [/1, and enter the
manufacturer code (see the table
below) for your AV amplifier (receiver)
using the number buttons.
3
Release [/1.
The VOL +/– buttons control the AV
amplifier's volume.
◆ If you want to control the TV's volume
Slide the TV/DVD switch to TV.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Manufacturer Code number
Sony 78, 79, 80, 91
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
z Hint
If you want to control the TV's volume even when
the TV/DVD switch is set to DVD, repeat the steps
above and enter the code number 90 (default).
6
Press X/x to select a setting, then
press ENTER.
The setting is selected and setup is
complete.
Example: "4:3 PAN SCAN"
Selected setting
SCREEN SETUP
TV TYPE: 4:3 PAN SCAN
SCREEN SAVER: ON
BACKGROUND: JACKET PICTURE
BLACK LEVEL : ON
OFF
BLACK LEVEL :
(COMPONENT OUT)
FULL
4:3 OUTPUT:
To enter the Quick Setup mode
Select "QUICK" in step 3. Follow from step
5 of the Quick Setup explanation to make
basic adjustments (page 30).
To reset all of the "SETUP" settings
1
Select "RESET" in step 3 and press
ENTER.
2
Select "YES" using X/x.
You can also quit the process and return
to the Control Menu by selecting "NO"
here.
3
Press ENTER.
All the settings explained on pages 77 to
82 return to the default settings. Do not
press [/1 while resetting the player,
which takes a few seconds to complete.
75
Setting the Display or
Sound Track Language
(LANGUAGE SETUP)
"LANGUAGE SETUP" allows you to set
various languages for the on-screen display or
sound track.
Select "LANGUAGE SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 76).
LANGUAGE SETUP
OSD: ENGLISH
MENU: ENGLISH
AUDIO: ORIGINAL
SUBTITLE: ENGLISH
◆ OSD (On-Screen Display)
Switches the display language on the screen.
◆ MENU (DVD VIDEO only)
You can select the desired language for the
disc's menu.
◆ AUDIO (DVD VIDEO only)
Switches the language of the sound track.
When you select "ORIGINAL," the language
given priority in the disc is selected.
◆ SUBTITLE (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select "AUDIO FOLLOW," the
language for the subtitles changes according
to the language you selected for the sound
track.
z Hint
If you select "OTHERS t" in "MENU,"
"SUBTITLE," or "AUDIO," select and enter a
language code from "Language Code List" on
page 92 using the number buttons.
Note
If you select a language in "MENU,"
"SUBTITLE," or "AUDIO" that is not recorded on
a DVD VIDEO, one of the recorded languages will
be automatically selected.
77

Settings and Adjustments

Using the Setup Display

By using the Setup Display, you can make
various adjustments to items such as picture
and sound. You can also set a language for the
subtitles and the Setup Display, among other
things.
For details on each Setup Display item, see
pages from 77 to 82.
Note
Playback settings stored in the disc take priority
over the Setup Display settings and not all of the
functions described may work.
ENTER
DISPLAY
1
Press DISPLAY when the player is
in stop mode.
The Control Menu appears.
2
Press X/x to select
(SETUP), then press ENTER.
The options for "SETUP" appear.
( 47 )
QUICK
CUSTOM
RESET
QUICK
76
Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 76).
The default settings are underlined.
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
SCREEN SAVER:
BACKGROUND: JACKET PICTURE
BLACK LEVEL:
BLACK LEVEL
(COMPONENT OUT)
4:3 OUTPUT:
◆ TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
4:3 Select this when you connect a
LETTER 4:3 screen TV. Displays a wide
BOX picture with bands on the upper
and lower portions of the
screen.
4:3 Select this when you connect a
PAN SCAN 4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3 LETTER BOX
4:3 PAN SCAN
16:9
78
1-18
3
Press X/x to select "CUSTOM,"
then press ENTER.
The Setup Display appears.
LANGUAGE SETUP
OSD: ENGLISH
MENU: ENGLISH
AUDIO: ORIGINAL
SUBTITLE: ENGLISH
4
Press X/x to select the setup item
from the displayed list:
"LANGUAGE SETUP," "SCREEN
SETUP," "CUSTOM SETUP,"
"AUDIO SETUP," or "SPEAKER
SETUP." Then press ENTER.
The Setup item is selected.
Example: "SCREEN SETUP"
Selected item
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
SCREEN SAVER:
BACKGROUND: JACKET PICTURE
BLACK LEVEL:
BLACK LEVEL :
(COMPONENT OUT)
4:3 OUTPUT:
X/x
Setup items
5
Press X/x to select an item, then
press ENTER.
The options for the selected item appear.
Example: "TV TYPE"
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
SCREEN SAVER: 4:3 LETTER BOX
BACKGROUND:
4:3 PAN SCAN
BLACK LEVEL:
BLACK LEVEL :
(COMPONENT OUT)
4:3 OUTPUT:
STOP
DVD VIDEO
Options
Note
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
◆ SCREEN SAVER
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play a Super Audio CD,
CD, or DATA CD (MP3 audio) for more than
15 minutes. The screen saver will help
prevent your display device from becoming
damaged (ghosting). Press H to turn off the
screen saver.
ON
ON Turns on the screen saver.
ON
OFF Turns off the screen saver.
: OFF
FULL
◆ BACKGROUND
Selects the background color or picture on the
TV screen when the player is in stop mode or
while playing a Super Audio CD, CD, or
DATA CD (MP3 audio).
JACKET The jacket picture (still picture)
PICTURE appears, but only when the
jacket picture is already
recorded on the disc (CD-
EXTRA, etc.). If the disc does
not contain a jacket picture, the
"GRAPHICS" picture appears.
GRAPHICS A preset picture stored in the
player appears.
BLUE The background color is blue.
BLACK
The background color is black.
◆ BLACK LEVEL
Selects the black level (setup level) for the
video signals output from the jacks other than
COMPONENT VIDEO OUT.
ON Sets the black level of the
output signal to the standard
level.
OFF Lowers the standard black
level. Use this when the picture
becomes too white.
ON
ON
OFF
FULL
16:9
OFF
FULL