Wi-Fi Protected Setup (Wps); Using Wps To Connect To A Network - Epson WorkForce Pro WF-C8190 User Manual

You see the
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the Start Here sheet.
Note: If you don't see the
name or entered the password incorrectly. Repeat these steps to try again.
Parent topic:
Related references
Status Icon Information
Related tasks
Entering Characters on the LCD Screen

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the
2. Select Wi-Fi.
icon on the LCD screen and should be able to connect to your product directly from
icon on the LCD screen, you may have selected the wrong network
Wi-Fi Direct Mode Setup
Wi-Fi or Wired Networking
home button, if necessary.
60