Table of Contents
Advertisement
Cleaning and Maintenance
Replacing Interior Halogen Oven Lights
Do not touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a
soft cloth.
1. Unsnap glass light cover using a screwdriver in the access groove.
2. Firmly grasp light bulb and pull out.
3. Replace with halogen bulb using volt and wattage requirements listed on
glass cover.
4. Replace the light cover by snapping glass cover onto metal box.
5. Reconnect power at the main fuse or circuit breaker.
Power Failure
Do not attempt to use during a power failure. Unit will not function.
Trouble Shooting Guide
PROBLEM
1. Oven will not function.
2. Oven does not
operate in self-clean.
3. Oven is not clean
after self-clean cycle.
4. Broil does not work.
5. Door will not open.
6. Oven light will not work.
7. Strong odor and/or smoke
CAUTION
DISCONNECT THE ELECTRIC POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BEFORE REPLACING BULB.
POSSIBLE CAUSE AND/OR REMEDY
Oven is not connected to electrical power.
Have electrician check power circuit breaker,
wiring and fuses.
Door is not shut tight enough for
automatic door latch to lock.
Temperature control knob not rotated all
the way past clean until it stops.
Temperature control knob is rotated too
far past broil position.
Oven is still in self-clean mode. If oven is
hot, door latch will release when a safe
temperature is reached.
Light bulb is burned out.
Oven is not connected to power.
This is normal burn-off of insulation and
is noticed first few time oven
protecitve oils in the oven. This will go away
is used.
after using oven a few times.
access
groove
light
bulb
29
glass light
cover
Advertisement
Table of Contents
