Table of Contents
Advertisement
27
1.888.610.7664
EDITING A LABEL
Selecting a Labelling Application Type
You can select six different types of labelling applications by
pressing a label application key. The label application type you
selected is shown in the LCD display.
Keys
Type
1
GENERAL
Shift+1
FACEPLATE
2
CABLE WRAP
Shift+2
CABLE FLAG
3
PATCH PANEL
PUNCH-DOWN
Shift+3
BLOCK
• When you change or reset a labelling application type, the text typed in is automatically used in
the new labelling application type except in the following cases:
- Changing from PUNCH-DOWN BLOCK is set to Horizontal or Backbone with sequenced
text
- Changing to PUNCH-DOWN BLOCK with sequenced text set to Horizontal or Backbone
• When a labelling application type is changed, the text typed in is automatically moved to the
new labelling application type by block units. Blank pages will be deleted but not the blocks.
• The new labelling application type is created for the text typed into to fit into each block.
• When the total number of blocks from the previous labelling application type cannot be divided
into the total number of blocks in the new labelling application type, the difference is filled with
empty blocks.
• When the total number of blocks from the previous labelling application type exceeds the total
number of blocks in the new labelling application type, the excess blocks are deleted.
GENERAL
Labels printed with this mode can be used for general purposes. In this
mode you can specify Label Length and Orientation.
• Label Length: Auto, 25 mm - 300 mm
• Orientation:
(Horizontal),
FACEPLATE
Labels printed with this mode can be used to identify various faceplates.
Block of text is evenly spaced on a single label. In this mode, you can
specify Label Length, Orientation and # of Blocks.
• Label Length: 50 mm, 25 mm - 300 mm
• Orientation:
(Horizontal),
• # of Blocks: 1, 1 - 5
Selecting a Labelling Application Type
www.calcert.com
15
10
20
5
25
0
30
Usage
Prints general purpose labels. (See page 27)
Prints faceplate labels. (See page 27)
Prints labels that wrap around a cable and Heat Shrink
Tube. (See page 28)
Prints cable flag labels. (See page 28)
Prints labels for a row of ports on a patch panel.
(See page 29)
Prints punch-down block 2-line labels.
(See page 29)
(Vertical)
(Vertical)
1
2
3
Horizontal
ABCDE
Vertical
sales@calcert.com
Advertisement
Table of Contents
