EDITING A LABEL
There are six different types of labeling applications.
GENERAL
Labels printed with this mode can be used for general purposes. In this
mode you can specify the following items:
• Label Length: Auto, 0.4" (10 mm) - 39.0" (999 mm)
• Orientation:
When the GENERAL mode is selected, you can press the Shift key
and then press the Enter key to add a new block.
FACEPLATE
Labels printed with this mode can be used to identify various faceplates.
Block of text is evenly spaced on a single label. In this mode, and you
can specify the following items:
• Label Length: 2.0" (50 mm), 0.4" (10 mm) - 39.0" (999 mm)
• # of Blocks: 1, 1 - 5
• Orientation:
CABLE WRAP
Labels printed with this mode can be wrapped around a cable or wire.
We recommend using Flexible ID Tape or Self-Laminating Tape for
Cable Wrap labels.
In CABLE WRAP mode, the text is printed as shown in the illustrations.
You can specify the following items:
• UOM: Dia(Ø) (Custom Diameter), Length (Custom Length), CAT5/6,
CAT6A, COAX, AWG, Rot.90
• Value: Depending on UOM
• Repeat: On, Off
• Cross-ID: Off, On (See "Setting Cross-ID" on page 6)
Text: Type in single or multiple lines of data
When using Flexible ID Tape:
• Labels made with Flexible ID Tape are not designed for use as electrical insulation.
• When wrapping labels around cylindrical
objects, the diameter of the object (1) should
be at least 0.12" (3 mm).
• The overlapping ends of the label or the
label flag (2) should be at least 0.2" (5 mm).
When using Self-Laminating Tape:
• The text is horizontally printed.
• When you insert the Self-Laminating Tape and select CABLE WRAP, you can specify
the following items:
- Label Length: Auto, 0.6" (15 mm) - 12" (300 mm)
- V. Offset (Adjusts Vertical Position): -7, -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6, +7
- Cross-ID: Off, On
4
Selecting a Labeling Application Type
Selecting a Labeling Application Type
(Horizontal),
(Horizontal),
(Vertical)
(Vertical)
1
Horizontal
Vertical
1 block
2 blocks
Standard
Rot.90
2