Xerox VersaLink C400V User Manual page 163

Symptom
Partial blanks, creased paper, or
blotted printing.
Vertical blanks appear.
Probable Causes
There is a problem with the
toner cartridge for that color.
The paper is damp.
The paper is outside the
recommended specification
range.
The printer is worn or damaged. For assistance, go to the Xerox
The toner cartridges are not
Xerox ® toner cartridges.
The paper is impeded in the
paper path.
Condensation inside the printer
causes partial blanks or creased
paper.
The laser lenses are blocked.
The printer is worn or damaged. For assistance, go to the Xerox
The toner cartridges are not
Xerox toner cartridges.
®
Solutions
Check the toner cartridge for damage and
replace if necessary. For assistance, go to the
Xerox Support website at
®
www.xerox.com/office/VLC400support.
Replace the paper.
Replace the paper with a recommended size
and type. For details, refer to
on page 98.
website at
www.xerox.com/office/VLC400support.
Verify that the toner cartridges meet
specifications and replace if necessary. For
details, refer to Consumables
• Remove any paper or debris from the
paper path.
• Ensure that the trays are pushed in all
the way.
• Ensure that the rear cover is closed
and locked.
Power on the printer and leave it on for at
least one hour to get rid of the condensation.
For assistance, go to the Xerox
website at
www.xerox.com/office/VLC400support.
Clean the laser lenses. For details, refer to
Cleaning the Laser Lenses.
website at
www.xerox.com/office/VLC400support.
Ensure that the toner cartridges meet
specifications and replace if necessary.
Xerox VersaLink C400 Color Printer
® ®
Troubleshooting
Supported Paper
Support
®
on page 132.
Support
®
Support
®
163
User Guide