Basic operation of wired remote controller
Basic operation of wired remote controller
8 AHU CONTROL KIT
1
Press the On/Off button on the control
part of the remote controller to start the
operation.
2
Press the Operation Selection button to
set the operating mode (Cooling/Heating
etc.).
3
Press the Temperature Control button to
set the desired temperature below the
indoor temperature. (Based on air
conditioning operation)
(Example) Remote controller
display window
L Indoor
temperature
During the initial operation, the
desired temperature is
automatically set below the indoor
temperature.
4
When you press the On/Off button
during use, the operation will stop.
L Desired
temperature