I Desired Humidity Control - LG PRCKD20E Owner's Manual

Supplementary function of wired remote controller
Desired humidity control
C
12 AHU CONTROL KIT
1 Press the Function Setting
button.
2 Set the Function Code of
Display 'C' to 01.
3 Press the Up/Down button to set
the target humidity.
4 Press the OK/CLEAR button to
decide the desired humidity.
* Desired humidity can be controlled in the range
of 40~60% by 5% increment.
* Default humidity is set to 50%.
Display C: Desired humidity
Function
Code
(Function set by code)
* Code 01: Desired humidity
: Desired humidity
(Example)
<Desired humidity: 50%>
Setting