LG PRCKD20E Owner's Manual page 10

Main function of wired remote controller
Current humidity / CO
Function
Code
(Function set by code)
* Code 01: Current humidity
* Code 02: Current CO
: Current humidity
: Current CO
(Example)
<Current humidity: 50%>
<Current CO level: 1500ppm>
2
10 AHU CONTROL KIT
level
2
Setting
level
2
level
2
3 Every time you press the Temperature
Control button and the Up/Down button,
the desired temperature will change.
Cooling/Energy saving:
18~30°C / Heating: 16~30°C
Dehumidification/Ventilation:
Desired temperature cannot be changed
4
When you press the Indoor Temperature
button, the Return Temperature of AHU will
be displayed for about 5 seconds.
5
To check the current humidity, press the 'Left'
button when the indoor
temperature is displayed and
the indoor humidity will be
displayed at Display 'C'.
To check the current CO
press the 'Right' button when
the indoor temperature is
displayed and the current
CO level will be
2
displayed at Display 'C'.
level,
2