LG PRCKD20E Owner's Manual page 27

C
Setting function of wired remote controller installation
5 Press the Right button to move to
'Setting of 2' by each mode.
6 Press the Up/Down button to select the
damper opening.
The damper opening that can be set is
in the range of 1~91
degrees.
7 Press the OK/CLEAR button to complete
the setting.
* This is the function to set the damper opening
of AHU.
* This applies only to the site where the damper
actuator is installed.
Display C: Installation setting display
Function
Code
Flashes
Cooling
external damper
opening of 40°
Heating external
damper opening
of 40°
Fan external
damper opening
of 40°
Setting1 Setting2
Owner's Manual 27