Introduction
The LG Network Camera is designed to use on an Ethernet network
and must be assigned an IP address to make it accessible.
This manual contains instructions on how to install and manage
the LG Network Camera in your networking environment. Some
knowledge of networking environments would be beneficial to the
reader.
Should you require any technical assistance, please contact
authorized service center.
Features
The LG Network Dome Camera offers the following functions:
•
Dual H.264 Stream for single Video Input
•
Multi-Codec (H.264, MJPEG) Streaming
•
Intelligent Video Analysis (Option)
•
PoE (Power over Ethernet) Support (802.3af )
•
2 Power (DC 12 V, PoE) Support
•
Audio Support (G.711, G.726 Full Duplex)
•
Pre/Post Alarm Support
•
Vandal Proof Support (IP66)
•
High resolution and high sensitivity with a 6.49 mm progressive
scan CMOS.
•
Day & Night function
•
ABF Auto Back Focus function
Introduction
Features Chart
This table shows the differences between the models.
LW6454 is used for the description, operations and details provided
in this manual.
Models
VA
Accessories
•
Program CD
•
Owner's Manual
•
Installation sticker
•
Fixing screw & hexagonal wrench
LW6424
LW6454
No
Yes
7