Cannot Start Scanning When Using The Control Panel; Scanned Image Problems; Uneven Colors, Dirt, Spots, And So On Appear When Scanning From The Scanner Glass; Straight Lines Appear When Scanning From Adf - Epson WorkForce WF-2835DWF User Manual

User's Guide
Related Information
"Uninstalling Applications" on page 170
&
"Installing the Latest Applications" on page 168
&

Cannot Start Scanning when Using the Control Panel

❏ Make sure Epson Scan 2 and Epson Event Manager are installed correctly.
❏ Check the scanning setting assigned in Epson Event Manager.

Scanned Image Problems

Uneven Colors, Dirt, Spots, and so on Appear when Scanning from
the Scanner Glass
❏ Clean the scanner glass.
❏ Remove any trash or dirt that adheres to the original.
❏ Do not press with too much force on the original or the document cover. If you press with too much force,
blurring, smudges, and spots may occur.
Related Information
"Cleaning the Scanner Glass" on page 158
&

Straight Lines Appear when Scanning from ADF

❏ Clean the ADF.
Straight lines may appear in the image when trash or dirt gets into the ADF.
❏ Remove any trash or dirt that adheres to the original.
Related Information
"Cleaning the ADF" on page 156
&

The Image Quality Is Rough

❏ In Epson Scan 2, adjust the image using items on the Advanced Settings tab, and then scan.
❏ If the resolution is low, try increasing the resolution and then scanning.
Related Information
"Scanning Using Epson Scan 2" on page 119
&
Solving Problems
199