Brushing Modes - Philips Sonicare DiamondClean Smart HX9985/11 Manual

Table of Contents

Advertisement

Brushing modes

3
4
3
4
35_021_1899_2_DFU-Luxury_A6_v1.indd 11
Your power toothbrush is equipped with 5 different
modes to accommodate all your oral care needs
(some models come with 4 brushing modes only).
The following modes are available:
Clean mode
Clean is a 2-minute mode, recommended to be
used with intensity level 3. It gives you a thorough
and complete clean and is recommended to be
used with the Premium Plaque Control brush
head. In order to reach optimal results, follow the
instructions below.
2
1 Begin brushing the upper right teeth (segment 1)
and brush for 20 seconds, on both the outer and
1
inner surfaces, before you move to the upper
6
front teeth (segment 2). Continue doing this for
segments 3 to 6 to ensure even brushing in all
5
6 segments of the mouth. You will hear a beep
after each 20-second interval, to indicate that
you should move to the next segment.
White+ mode
White+ is a 2-minute 40-seconds mode,
recommended to be used with intensity level 3 and
the Premium White brush head. In order to reach
optimal results, follow the instructions below.
2
1 Begin brushing the upper right teeth (segment
1) and brush for 20 seconds before you move
1
to the upper front teeth (segment 2). Continue
6
doing this for segments 3 to 6 to ensure even
brushing in all 6 sections of the mouth.
5
2 After completing all 6 of these segments,
the toothbrush switches to polishing mode
automatically.
11
English
22/03/17 09:36

Advertisement

Table of Contents
loading

Table of Contents