Table of Contents
Advertisement
26
English
FCC Compliance Statement
35_021_1899_2_DFU-Luxury_A6_v1.indd 26
7 Wedge the screwdriver between the battery
and the black frame at the bottom of the
internal components. Then pry the screwdriver
away from the battery to break the bottom of
the black frame.
8 Insert the screwdriver between the bottom of
the battery and the black frame to break the
metal tab connecting the battery to the green
printed circuit board. This will release the
bottom end of the battery from the frame.
9 Grab the battery and pull it away from the
internal components to break the second metal
battery tab.
Caution: Be aware of the sharp edges of the
battery tabs so as to avoid injury to your fingers.
10 Cover the battery contacts with tape to prevent
any electrical short from residual battery
charge. The rechargeable battery can now be
recycled and the rest of the product discarded
appropriately.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1
This device may not cause harmful interference,
and
2 This device must accept any interference
received, including interference that may cause
undesired operation.
22/03/17 09:36
Advertisement
Table of Contents
