Overview - Cisco Nexus 93108TC-FX Installation Manual

Overview

•
Overview
The Cisco Nexus 93108TC-FX switch (N9K-C93108TC-FX) is a 1-RU, fixed-port switch designed for
spine-leaf-APIC deployment in data centers. This switch has 48 10GBASE-T Application Policy Infrastructure
Controllers (APICs) facing ports that support 100-Megabits, 1- or 10-Gigabit Ethernet connections, and it has
six fixed 40/100-Gigabit QSFP28 spine-facing ports. The chassis for this switch includes the following
user-replaceable components:
• Fan modules (four) with the following airflow choices:
• Power supply modules (two—one for operations and one for redundancy [1+1]) with the following
The following figure shows the hardware features seen from the port side of the chassis.
Overview, page 1
◦ Port-side intake airflow with burgundy coloring (NXA-FAN-30CFM-B)
◦ Port-side exhaust airflow with blue coloring (NXA-FAN-30CFM-F)
choices (do not mix AC and DC power sources and do not mix airflow directions):
◦ 500-W AC power supply with port-side intake airflow (burgundy coloring) (NXA-PAC-500W-PI)
◦ 500-W AC power supply with port-side exhaust airflow (blue coloring) (NXA-PAC-500W-PE)
◦ 930-W DC power supply with port-side intake airflow (burgundy coloring) (NXA-PDC-930W-PI)
◦ 930-W DC power supply with port-side exhaust airflow (blue coloring) (NXA-PDC-930W-PE)
◦ 1200-W HVAC/HVDC power supply with dual-direction airflow (white coloring)
(N9K-PUV-1200W)
Note If you are using the 1200-W HVAC/HVDC power supply, the power supply automatically
uses the same airflow direction as used by the fan modules installed in the same switch.
C H A P T E R
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
1
1