Switch And Module Weights And Quantities; Transceiver And Cable Specifications; Switch Power Input Requirements - Cisco Nexus 93108TC-FX Installation Manual

Switch and Module Weights and Quantities

Switch and Module Weights and Quantities
Component
Cisco Nexus 93108TC-FX Chassis (N9K-C93108TC-FX)
Fan Module
– Port-side exhaust (blue) (NXA-FAN-30CCFM-F)
– Port-side intake (burgundy) (NXA-FAN-30CCFM-B)
Power Supplies
– 500-W AC port-side exhaust (blue) (NXA-PAC-500W-PE)
– 500-W AC port-side intake (burgundy) (NXA-PAC-500W-PI)
– 1200-W HVAC/HVDC dual-direction (white) (N9K-PUV-1200W)
– 930-W DC port-side exhaust (blue) (NXA-PDC-930W-PE)
– 930-W DC port-side intake (burgundy) (NXA-PDC-930W-PI)

Transceiver and Cable Specifications

To determine which transceivers, adapters, and cables are supported by this switch, see
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see
https://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.

Switch Power Input Requirements

The following table lists the typical amount of power consumed by the switch, and it lists the maximum
amount of power that you must provision from the power source as input to the power supply and switch for
peak conditions.
Note Some power supplies might have UL listed capabilities that are greater than the maximum power
requirements for a switch. To determine the power consumption characteristics for the switch, use the
typical and maximum requirements listed in the following table.
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
46
System Specifications
Weight per Unit Quantity
17.4 lb (7.9 kg) 1
— 4
0.92 lb (0.4 kg)
0.92 lb (0.4 kg)
— 2 (1 for
operations
2.42 lb (1.1 kg)
and 1 for
2.42 lb (1.1 kg)
redundancy)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
https://www.cisco.com/