Overview
1
Beacon [BCN], Status [STS], and Environment
[ENV] LEDs
2
48 10/1-Gigabit RJ45 ports
3
6 40/100-Gigabit QSFP28 ports
To determine which transceivers, adapters, and cables are supported by this switch, see the
Modules Compatibility Information
The following figure shows the hardware features seen from the power supply side of the chassis.
1
Two power supplies (one used for operations and
one used for redundancy) (AC power supplies
shown) with power supply slot 1 on the left and
slot 2 on the right
2
Four fan modules with fan slot 1 on the left and
fan slot 4 on the right
3
Console port (RS232 port)
4
Management port (RJ-45 port)
5
Chassis LEDs (Beacon [BCN] and Status [STS])
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
2
4
Screw holes (6) for attaching rack mounting
brackets
5
Grounding pad
document.
6
Management port (SFP+ port)
7
USB port
8
Screw holes (6) for attaching rack mounting
brackets
9
Grounding pad
Overview
Cisco Transceiver