Cisco Nexus 93108TC-FX Installation Manual page 39

Connecting the Switch to the ACI Fabric
Leaf Switch
Cisco Nexus 93108TC-EX
Cisco Nexus 93108TC-FX
Cisco Nexus 93120TX
Cisco Nexus 93128TX
Cisco Nexus 93180LC-EX
Cisco Nexus 93180YC-EX
Cisco Nexus 93180YC-FX
Cisco Nexus 9332PQ
Cisco Nexus 9336C-FX2
Cisco Nexus 9348GC-FXP
Cisco Nexus 9372PX
Cisco Nexus 9372PX-E
Cisco Nexus 9372TX
Cisco Nexus 9372TX-E
Cisco Nexus 9396PX
Cisco Nexus 9396TX
1 For 10-Gigabit support, use a QSFP-to-SFP adapter (such as CVR-QSFP-SFP10G) with a SFP+ or SFP transceiver.
The following table lists the number of ports that you can connect on each ACI-mode line card installed in a
modular spine switch (Cisco Nexus 9504, 9508, or 9516 switch) or on each Cisco Nexus 9336PQ spine switch.
The number of line cards in a spine switch depends on the model of the spine switch (the Cisco Nexus 9504
supports four line cards, the Cisco Nexus 9508 supports up to eight line cards, and the Cisco Nexus 9516
supports up to 10 line cards in ACI-mode).
Maximum Number of
Uplink Connections
6 QSFP28 fixed ports
6 QSFP28 fixed ports
6 QSFP+ fixed ports
with M6PQ or M4PQ-E 6 QSFP+ ports
uplink module
with M12PQ uplink 8 QSFP+ ports (leftmost
module 8 ports are supported on
12-port module)
6 QSFP28 fixed ports
6 QSFP28 fixed ports
6 QSFP28 fixed ports
6 QSFP+ fixed ports
6 QSFP28 fixed ports
2 QSFP28 fixed ports
6 QSFP+ ports
with M6PQ or M4PQ-E 6 QSFP+ ports
uplink module
with M12PQ uplink 12 QSFP+ ports
module
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
Connecting Leaf Switches to Spine Switches
Supported Transmission
Speeds (Uplink Ports)
10, 40, and 100 Gigabits
10, 40, and 100 Gigabits
40 Gigabits
40 Gigabits
1, 10, or 40 Gigabits
40, and 100 Gigabits
10, 40, and 100 Gigabits
10, 40, and 100 Gigabits
10 or 40 Gigabits
10, 40, or 100 Gigabits
40 or 100 Gigabits
40 Gigabits
40 Gigabits
10 or 40 Gigabits
1
1
1
1
1
1
29