Table of Contents
Advertisement
Connecting Leaf Switches to Spine Switches
Spine Switch or Modular Line Card
Cisco Nexus 9336PQ switch
N9K-X9732C-EX line card supported by Cisco Nexus
9504, 9508 modular switches
N9K-X9736PQ line card supported by Cisco Nexus
9504, 9508, and 9516 modular switches
To determine which transceivers, adapters, and cables are supported by this switch, see
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html. To see the
transceiver specifications and installation information, see
interfaces-modules/transceiver-modules/products-installation-guides-list.html.
Statement 1053—Class 1M Laser Radiation
Warning
Class 1M laser radiation when open. Do not view directly with optical instruments.
Statement 1055—Class I and Class 1M Laser
Warning
Class I (CDRH) and Class 1M (IEC) laser products.
Warning
Statement 1056—Unterminated Fiber Cable
Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do not
view directly with optical instruments. Viewing the laser output with certain optical instruments (for
example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard.
Before You Begin
• The leaf and spine switches in the fabric must be fully installed in their racks and grounded.
• If there are modular switches in the fabric, their ACI-mode line cards must already be installed. The line
cards can be of the following types:
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
30
◦ 36-port 40-Gigabit (N9K-X9736PQ)
◦ 32-port 100-Gigabit (N9K-X9732C-EX) (supported by Cisco Nexus 9504 and 9508 modular
switches)
Connecting the Switch to the ACI Fabric
Maximum Number of
Supported Transmission
Uplink Connections
Speeds
36 QSFP+ fixed ports
40 Gigabits
32 QSFP28 fixed ports
1, 10, 25, 40, 50, or 100
Gigabits
36 QSFP+ fixed ports
1, 10, or 40 Gigabits
http://www.cisco.com/c/en/us/support/
http://www.cisco.com/
Advertisement
Table of Contents
