Table of Contents
Advertisement
The coffee is supplied too
slowly or a drop at a time.
The slices coffee grounds are
soft and mushy.
TROUBLE SHOOTING
Problem
Coffee does not come out of
one or both of the spouts.
The appliance does not make
coffee.
The appliance does not come
on.
The brewing unit cannot be
removed.
The appliance makes a weird
sound (not as normal).
At the end of descaling, the
appliance requests a third
rinse.
The milk does not come out of
the milk spout.
The coffee is ground too
finely.
The grind level is not correct.
Possible cause
The coffee spouts are blocked. Clean the coffee spouts.
The appliance has detected
impurities in its internal
circuits. See the information
shown on the display.
The appliance is not set to
'On'.
The appliance has not been
set to 'Standby' correctly.
The drip tray has not been
removed.
The brewing unit is not in the
correct position.
The brewing unit and the
infuser are dirty.
During the two rinse cycles,
the water tank has not been
filled to the MAX level.
The lid of the milk container is
dirty.
Adjust the grind level.
Adjust the grind level (in the
direction of 1).
Remedy
Wait for the appliance to be
ready for use again and select
the required beverage again.
Push the main switch to set
the appliance to 'On'.
Push the On button to set the
appliance to 'On'.
Push the Standby button to
set the appliance to
'Standby'.
Remove the drip tray.
Close the door and set the
appliance to 'On'. The
brewing unit automatically
returns to the correct position.
Clean the infuser and all parts
of the brewing unit. Lubricate
the o-rings with the lubricating
grease.
Obey the instructions shown
on the display.
Clean all components of the
milk container.
EN 39
Advertisement
Table of Contents
