Table of Contents
Advertisement
The milk contains large
bubbles and squirts out of the
milk spout or there is little
froth.
ENVIRONMENTAL ASPECTS
Disposal of packaging and appliance
Sustainable materials have been used during manufacture of this appliance. This appliance must
be disposed of responsibly at the end of its service life. Ask your local authorities for more
information about how to do this.
The appliance packaging is recyclable. The following materials may have been used:
•
Cardboard.
•
Polyethylene film (PE).
•
CFC-free polystyrene (PS rigid foam).
Dispose of these materials in a responsible manner and in accordance with government
regulations.
The product has been marked with a crossed-out dustbin symbol to remind you of the
EN 40
The milk is not cold enough or
is not semi-skimmed or
skimmed.
The milk froth adjustment knob
is incorrectly adjusted.
The lid of the milk container or
the milk froth adjustment knob
is dirty.
The hot water connection
nozzle is dirty.
obligation to dispose of electrical household appliances separately.
This means that the appliance may not be included with normal
domestic refuse at the end of its service life. The appliance must be
taken to a special municipal centre for separated waste collection or to
a dealer providing this service.
Separate collection of household appliances helps to prevent any
potential negative impact on the environment and on human health
caused by improper disposal. It ensures that the materials of which the
Use skimmed or partially
skimmed milk at refrigerator
temperature (about 5 °C). If
the result is not as you wish,
try changing brand of milk.
Adjust the milk froth
adjustment knob.
Clean all components of the
milk container.
Clean the nozzle.
Advertisement
Table of Contents
