LG PQNUD1S41 Installation & Owner's Manual page 41

• Checking the accumulative power (Accum Power) (1 ~ 4 ports)
Accumulative power: Values have been continuously accumulated since the initial power is ap-
plied on the power indicator. When wattage is more than 999 999, it will return to "0".
- Screen Description
A C C U M ( P 1 ) 0 . 0 kWh
A D D R - 0 :
0 . 0 kWh
A D D R - 1 :
0 . 0 kWh
A D D R - 2 :
0 . 0 kWh
- Press the LEFT/RIGHT (◀,▶)button to increase/decrease the wattmeter number.
- Press the UP/DOWN (▲,▼)button to check the electric energy of all indoor units connected.
- In 1.15 or less version, each indoor unit number increases sequentially according to the set number
of units.
- In 1.16 or higher version, it displays the address of the indoor unit set for each indoor unit number.
- If the standby power is set to Manual, the last page is displayed as follows.
A C C U M ( P 1 ) 0 . 0 kWh
S T B P : 0 . 0 kWh
• Checking the accumulative gas consumption (Accumulative Gas) (5 ~ 8 ports)
Instant gas: Values have been accumulated since the initial power is applied at the gas meter.
When the displayed gas usage is more than 999 999, it will return to "0".
- Screen Description
A C C U M ( G 1 ) 0 . 0 kL
A D D R - 0 :
0 . 0 kL
A D D R - 1 :
0 . 0 kL
A D D R - 2 :
0 . 0 kL
- Press the LEFT/RIGHT (◀,▶)button to increase/decrease the wattmeter number.
- Press the UP/DOWN (▲,▼)button to check the gas energy of all indoor units connected.
- In 1.15 or less version, each indoor unit number increases sequentially according to the set number
of units.
-In 1.16 or higher version, it displays the address of the indoor unit set for each indoor unit number.
h In the case of gas on, standby gas usage is not displayed separately because there is no standby
gas.
- In 1.16 or higher version, if you press left/right button(◀, ▶), it is displayed as follows in the last
page.
In this screen, you can check the accumulated power amount (gas usage amount) of each ad-
dress for the entire indoor units.
A C C U M ( A L L )
A D D R - 0 : 0 . 0 k W h
A D D R - 1 : 0 . 0 k W h
A D D R - 2 : 0 . 0 k W h
Wattmeter number
Total accumulative wattage
at P (1) wattmeter
The accumulative wattage of each
indoor unit
Each indoor unit No.
N
D O W
Gas meter No.
Total accumulative gas usage
at G (1) gas meter
The accumulative gas usage of each
indoor unit
Each indoor unit No.
SETTING AND USING METHOD
41