LG PQNUD1S41 Installation & Owner's Manual page 27

Setting detailed properties (EHP products)
• Wattmeter property setting: Based on the wattmeter type setting, it automatically switches to
property setting screen.
- Pulse type: Set power consumption by pulse, set attached location (Indoor/Outdoor unit
classification), set indoor unit address
- CT type: Set CT and device constant value, set attached location (Indoor/Outdoor unit
classification), set indoor unit address
- RS-485 communication type: Set wattmeter address, set attached location (Indoor/Outdoor
unit classification), set indoor unit address
• When setting pulse type
After setting all wattmeters, press the MENU button to save the setting and move to the initial
screen.
SETTING AND USING METHOD
Press the ▼ button at the initial setting screen to
enter the wattmeter property setting screen.
When the wattmeter item to set flashes, press the
SELECT button to change to detail setting win-
dow.
It proceeds in the order of Set power consumption
by pulse ' Set power consumption device ' Set
connected indoor address.
- Set power consumption by pulse (WHM W/PULSE SELECT)
: Enter the value displayed on the wattmeter as power con-
sumption per pulse
- Set power consumption device (CONSUME UNIT SELECT)
: Check and set whether the product on which the
wattmeter is installed is a indoor or outdoor unit.
※If one indoor unit is set to use both outdoor unit power
distribution and indoor unit power distribution, wattage
value is displayed as indoor unit wattage value by sum-
ming outdoor unit power distribution value and indoor
unit power distribution value.
- Set connected indoor address (INDOOR
ADDRESS SET)
: Enter the indoor address connected to applicable
wattmeter.
※After the initial installation, address setting of indoor unit
connected to each port shall not be changed. If it is
changed, previous data cannot be used.
After setting the applicable item, press the
SELECT button to save the setting and to move to the next
stage.
Setting information is reflected to the detail setting
window.
27