LG PQNUD1S41 Installation & Owner's Manual page 33

• When setting the properties of the pulse-type gas meter (LHM1~LHM4)
C O N N E C T I O N :
S T A N D B Y P :
S E T M E T E R
W H M 1 : N O T U S E
: N O T
W H M 2 U S E
W H M 3 : N O T U S E
W H M 4 : N O T U S E
L H M 1 : N O T U S E
L H M 2 : N O T U S E
L H M 3 : N O T U S E
L H M 4 : N O T U S E
* L H M L / P U L S E
1 . N O T U S E
L
2 . 1 / P U L S E
3 . 2 L / P U L S E
I N D O O R A D D R E S S
( S T A R T ) → ( E N D )
( 0 0 ) → ( 0 0 )
L H M 1 : 1 0 L , O D
: N O T
L H M 2 U S E
L H M 3 : N O T U S E
L H M 4 : N O T U S E
After setting every gas meter, press the menu button to save the settings, and then move to the
initial screen.
M A S T E R
A U T O
D O W N
D O W N
S E L E C T *
D O W N
S E T
U , 0 0 - 0 0
SETTING AND USING METHOD
On the initial setting screen, press the (▼) button
and the screen will be switched to the wattmeter /
gas meter property setting screen.
On the wattmeter property setting screen, press
the (▼) button and the screen will be switched to
gas meter property setting screen.
When the item of the wattmeter you want to set
is blinking, press the SELECT button, and the
screen will be switched to the detailed setting
screen.
Set gas consumption per pulse ' Set the connected in-
door unit address in order.
- Set gas consumption per pulse (LHM L / PULSE SE-
LECT).
: Please enter a value shown in the gas meter as the
gas consumption recognized per pulse.
- Set the connected indoor unit address (INDOOR AD-
DRESS SET).
: Enter the address of the indoor unit connected to the
gas meter.
※After the initial installation, address setting of indoor
unit connected to each port shall not be changed.
If it is changed, previous data cannot be used.
- Set connected indoor address (INDOOR ADDRESS
SET)
: Enter the indoor address connected to applicable
wattmeter.
After setting the item, press the SELECT button to save
the settings, and then move to the next step.
Configuration information is reflected in the
detailed setting window.
33