LG PQNUD1S41 Installation & Owner's Manual page 32

SETTING AND USING METHOD
32
Setting functions (GHP products)
• Set the properties of the wattmeter and gas meter.
- Pulse type: Set power consumption per pulse / gas consumption, mounting location (divide in-
door and outdoor unit), and the indoor unit address.
- CT (VT) type: Set CT (VT), the instrument integer value, mounting location (divide indoor and
outdoor unit), and the indoor unit address.
WHM1 ~ WHM4: Mount the wattmeter.
LHM1 ~ LHM4: Mount the gas meter.
• When setting the properties of the pulse-type wattmeter (WHM1~ WHM4).
C O N N E C T I O N :
S T A N D B Y P :
S E T M E T E R
W H M 1 : N O T U S E
W H M 2 : N O T U S E
W H M 3 : N O T U S E
W H M 4 : N O T U S E
* W H M W / P U L S E
1 . N O T U S E
W
2 . 1 / P U L S E
3 . 2 W / P U L S E
C O N S U M E U N I T
1 . O U T D O O R U N I T
2 . I N D O O R U N I T
I N D O O R A D D R E S S
( S T A R T ) → ( E N D )
( 0 0 ) → ( 0 0 )
W H M 1 : 2 W , O D U , 0 0 - 0 0
: N O T
W H M 2 U S E
W H M 3 : N O T U S E
W H M 4 : N O T U S E
After setting every wattmeter, press the menu button to save the settings and the screen will be
switched to the initial screen.
M A S T E R
On the Home screen, press the (▼) button and
A U T O
then the screen is switched to the wattmeter / gas
meter property setting screen.
D O W N
D O W N
When the item of the wattmeter you want to set
is blinking, press the SELECT button, and the
screen will be switched to the detailed setting
screen.
Set power consumption per pulse ' set the power consump-
S E L E C T *
tion device ' set the connected indoor unit address in order.
- Set power consumption per pulse (WHM W / PULSE SELECT).
: Please enter a value shown in the wattmeter as the power
consumption recognized per pulse.
D O W N
- Set the power consumption device (CONSUME UNIT SELECT).
: Please set up after making sure that the wattmeter is in-
stalled, and checking whether the product installed is the in-
door or outdoor unit.
※If one indoor unit is set to use both outdoor unit power dis-
S E L E C T
tribution and indoor unit power distribution, wattage value
is displayed as indoor unit wattage value by summing out-
door unit power distribution value and indoor unit power
distribution value.
- Set the connected indoor unit address (INDOOR ADDRESS
SET).
: Enter the address of the indoor unit connected to the
wattmeter.
※After the initial installation, address setting of indoor unit
S E T
connected to each port shall not be changed. If it is
changed, previous data cannot be used.
After setting the item, press the SELECT button to save the set-
ting, and then move to the next step.
Configuration information is reflected on the
detailed setting window.