E-Enter The Service Access - Traulsen TU048QC Owner's Manual

VII. e-ENTER THE CUSTOMER ACCESS CODE:
Use the security code 0, A, 1
Press the set button
SET
Press the set button
SET
The display will show three zeros with the left zero flashing
Press the set button
SET
The display will show three zeros with the center zero flashing
Press the down arrow key
When you reach A press set
The display will show zero, A, zero with the right zero flashing
Press the up arrow key
When you reach 1 press set
The display will read
You are now in the SERVICE PARAMETERS.
VII. MICROPROCESSOR CONTROL (cont'd)
and the following instructions:
. The display will read
.
.
to sequence through F, E, d, C, b, A, 9, 8, 7,...etc.
.
SET
to sequence through 1, 2, 3, 4, 5, 6, 7, 8, 9, A, b,...etc.
.
SET
Thermostat Set Point High. Press
Service Access.
.
to view and
SET
-8-
again to exit.
SET