Traulsen TR35786 Specifications

Project
Model Specified:
G-Series Pass-Thru Glass Door
Refrigerators/Self-Contained
Equipped with an
easy to use
microprocessor
control!
Standard Product Features
• High Quality Stainless Steel Exterior Front
• Corrosion Resistant Anodized Aluminum One-Piece Sides
• Durable Anodized Aluminum Interior
• Microprocessor Control With LED Temperature Readout
• Top-Mounted, Balanced, Self-Contained Refrigeration System
• Large High Humidity Evaporator Coil Outside The Food Zone
• Load-Sure Guard Protects Against Improper Loading
• Full or Half Length Hinged Glass Doors With Locks
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Incandescent Lights With Front Mounted Switch
• Damage Resistant Stainless Steel Breaker Caps
• Three (3) Adjustable Epoxy Coated Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
• Energy Saving Automatic Non-Electric Condensate Evaporator
• Magnetic Snap-In Door Gaskets
• Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device Provides Quick
Refrigeration Recovery Times
• Stainless Steel One-Piece Louver Assembly
• 9' Cord & Plug Attached
• Set of Four (4) 6" High Casters With Locks
• One Year Parts And Labor Warranty
• Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
Model G11004P
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
Quantity
One & Two Section Models, 32" Deep
Aside from their anodized aluminum side and interior finishes,
G
Traulsen's G-Series "Dealer's Choice" models meet or exceed the
standard specifications and performance of most other brands top
SERIES
tier product offerings. Reliable, energy efficient, and durable, with
Stainless Steel
large individual storage capacities, the high quality G-Series line-up
Front
includes a wide range of one and two section pass-thru refrigerator
models, built in our most popular footprints. They are available with
either full or half height doors, and the added convenience of a
variety of different door hingings to choose from. In addition, each
also includes a number of user-friendly features, making them one
of the best overall equipment values in Foodservice today, and the
right fit for nearly any commercial application.
*Door hinging when viewed from that side.
Single Section Models
Control Side Other Side
Model # Door Hinging
G11002P Half Right
G11003P Half Right
G11004P Half Left
G11005P Half Left
G11012P Full Right
G11013P Full Right
G11014P Full Left
G11015P Full Left
Optional Accessory Kits
• Additional Epoxy Coated Shelves*
• No. 1 Type Tray Slides* To Accommodate either: (1) 18" x
26" or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
• No. 4 Type Tray Slides* To Accommodate (1) 18" x 26" Sheet
Pans (equips one full section)
• Universal Type Tray Slides* To Accommodate Either (1) 18" x
26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam Table
Pans, Adjustable To 4" O.C.
• Chrome Plated Shelves* (for use in lieu of standard shelving)
• 6" High Adjustable Legs (for use in lieu of standard casters)
• Two Year Service/Labor Warranty Available
*Please refer to spec sheet 4-7 for
optional accessory kit details
NOTE: All optional accessory kits are shipped separately for
later installation by others at the jobsite.
Approval: __________________________________
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Item #
CSI Section 11400
AVAILABLE MODELS
Two Section Models
Control Side Other Side
Hinging* Model # Door Hinging
Right G21004P Half Left/Right
Left G21005P Half Left/Left
Left G21006P Half Right/Left
Right G21007P Half Right/Right Right/Right
Right G21014P Full
Left G21015P Full
Left G21016P Full
Right G21017P Full
Hinging*
Left/Right
Left/Left
Right/Left
Left/Right Left/Right
Left/Left Left/Left
Right/Left Right/Left
Right/Right Right/Right
SECTION
4-6