Table of Contents
Advertisement
VII. k-SETTING THE DATE:
The date must be set in order for the data storage memory to correctly log events. Follow the instructions to enter the
customer access code on page 8. When the control displays
arrow key
until the control display reads
show
(year). The right two numbers will be flashing. Press the arrow keys
When the correct year is displayed, press the set button
two numbers will be flashing. Use the arrow keys
played, press the set button
Press the arrow keys
The display will then read
next parameter, press the alarm cancel button to exit
VII. l-SETTING DAYLIGHT SAVINGS TIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings Time. Follow the
instructions to enter the customer access code on page 8. When the control displays
High, press the down arrow key
SET
button
. The display will show
Time).
For "YES" press the set button
display will read
Daylight Savings Time. You can press the up or down arrow keys
press the alarm cancel button to exit
VII. MICROPROCESSOR CONTROL (cont'd)
SET
.
The display will show
to set the day.
When the correct day is displayed, press the set button
Date. You can use the up or down arrow keys
until the display reads
Daylight Savings Time (Yes, automatically adjust for Daylight Savings
SET
,for "NO" press the up or down arrow key
Daylight Savings Time (no). Press the set button
)
)
)
.
Thermostat Set Point High, press the down
Date. Press the set button
SET
. The display will show
to set the month.
(day). The right two numbers will be flashing.
)
)
)
.
Daylight Savings Time. Press the set
SET
-12-
SET
. The display will
to set the year.
(month). The right
When the correct month is dis-
to scroll to the
Thermostat Set Point
. The
. The display will read
to scroll to the next parameter or
SET
.
Advertisement
Table of Contents
