Gamma Adjustment - ATEN KN2116VA User Manual

Gamma Adjustment

If it is necessary to correct the gamma level for the remote video display, use
the Gamma function of the Video Settings dialog box.
 Under Advanced configuration, there are ten preset and four user-defined
levels to choose from. Drop down the list box and choose the most suitable
one.
 For greater control, clicking the Advanced button brings up the following
dialog box:
 Click and drag the diagonal line at as many points as you wish to achieve
the display output you desire.
 Click Save As to save up to four user-defined configurations derived from
this method. Saved configurations can be recalled from the list box at a
future time.
 Click Reset to abandon any changes and return the gamma line to its
original diagonal position.
 Click OK to save your changes and close the dialog box.
 Click Cancel to abandon your changes and close the dialog box.
Note: For best results, change the gamma while viewing a remote server.
Chapter 5. The User Interface
83