Device Level Ap Gui Interface - ATEN KN2116VA User Manual

KVM over IP Switch User Manual

Device Level AP GUI Interface

If a switch is chosen in the Sidebar, the Main panel looks similar to the one
below:
The page is essentially the same as the one for the Browser GUI (see page 129),
with the exception that there are filters at the top of the columns. The filters
allow you to expand or limit the scope of the users and groups that are
displayed, as described in the following table:
Filter
Name
Config All
Permitted
Restricted
132
To filter on the User or Group name, key in the name, partial
name or partial name, then press Enter. Only the Users and
Groups whose names correspond to what you have keyed in
appear in the list.
Wildcards (? for single characters; * for multiple characters) and
the keyword "or" are supported. E.g., h*ds would return hands
and hoods; h?nd would return hand and hind, but not hard; h*ds
or h*ks would return hands and hooks.
All Users and Groups appear in the list.
Only Users and Groups with configuration permissions appear in
the list.
Only Users and Groups that do not have configuration
permissions appear in the list.
Description