ATEN KN2116VA User Manual page 156

KVM over IP Switch User Manual
2. Check the outlet or outlets you want to associate with the port.
3. Click OK.
To disassociate an outlet from a port, select it in the main panel and click
Remove.
 Configuration
You can configure an outlet's settings directly from this page by clicking
the Configuration button. When you do, the Pon Outlet Configuration
dialog box appears:
Set the configuration options according to the information in the table,
below:
Heading
Station
Port
Name
140
The name of the device that the outlet belongs to.
The outlet's current name
An editable field for naming the outlet. Each outlet can be given
a distinctive name. The maximum number of characters is 15.
Explanation