Outlet Configuration - ATEN KN2116VA User Manual

KVM over IP Switch User Manual

Outlet Configuration

The outlet configuration settings that can be made on this page are the same
ones described under Power Management, in the table on page 141.
 Click on a setting to drop down the list of choices.
 To give more than one outlet the same setting at the same time, click to put
a check mark in front of the outlets you want to configure. When you
change the setting for any one of the outlets, each of the selected outlets
will get the new setting.
 To change the setting for all of the outlets at the same time, click to put a
check mark in front of the PON's name. All of the outlets are selected.
When you change the setting for any one of the outlets, all of the outlets
will get the new setting.
200