Security Settings - Acer U5200 Manual

Projector gateway

Hide thumbs Also See for U5200:

Table of Contents

Security Settings

If you are projecting sensitive information, you may want to set up a WEP or

WPA-PSK key by clicking Security Settings.

The WEP key can support from 64- up to 128-bit encryption for wireless

connections. This feature can be set and enabled by the supervisor. You must

enter 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters. The WPA-

PSK/WPA2-PSK encryption key should be entered as 8 to 63 ASCII characters.

This feature can be set and enabled by the supervisor.

Note: ASCII (American Standard Code for Information

Interchange) is a code for representing characters as "0-9, a-z, A-Z,

!, @, #, $, %, &, *, -, _, +,=, /, ?"are allowed. Hexadecimal digits

consist of the numbers 0-9 and the letters A-F/a-f.

Note: If you are using Windows XP, you need to apply the WPA2-

PSK hotfix from Microsoft.

Note: Enabling WPA-PSK/WPA2-PSK increases the computing load,

which may affect projection performance.

Note: Security is only required for wireless models.

Table of Contents