Security Settings; Admin Password Setup - Acer P7203B Manual

Projector gateway

Hide thumbs Also See for P7203B:

Table of Contents

Security settings

If you're projecting sensitive information, you may want to set up a WEP or

WPA-PSK key by clicking Security settings.

The WEP key can support from 64- up to 128-bit encryption for wireless

connections. This feature can be set and enabled by the supervisor. You must

key in 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters. The WPA-

PSK/WPA2-PSK encryption key should be entered as 8 to 63 ASCII characters.

This feature can be set and enabled by the supervisor.

Note: ASCII (American Standard Code for Information

Interchange) is a code for representing characters as "0-9, a-z, A-Z,

!, @, #, $, %, &, *, -, _, +,=, /, ?"are allowed. Hexadecimal digits

consist of the numbers 0-9 and the letters A-F/a-f.

Note: Update additional hotfix from Microsoft for WPA2-PSK if

Windows XP OS.

Note: Increase computing loading if enable WPA-PSK/WPA2-PSK

function, please consider this and get acceptable projection

performance.

Note: Security is only required for wireless model.

Change the password to login Advance webpage by clicking Admin password

setup. The default supervisor password is 123456.

Table of Contents