Table of Contents
Advertisement
Power saving
The monitor will be driven into Power Saving" mode by the control signal
from the display controller, as indicated by the amber-color power LED.
LED
State
Light
ON
Blue
Power Saving
Amber
Mode
The power saving states will be kept until a control signal has been detected
or the keyboard or mouse is activated. The recovery time from Active OFF
state back to ON state is around 3 seconds.
D D C
To make your installation easier, the monitor is able to Plug and Play with
your system if your system also supports DDC protocol. The DDC (Display
Data Channel) is a communication protocol through which the monitor
automatically informs the host system about its capabilities, for example,
supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
EN-8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the S232HL and is the answer not in the manual?
Questions and answers
how do you navigate to the sliders
To navigate to the sliders on the Acer S232HL, follow these steps:
1. Press the MENU key to bring up the OSD (On-Screen Display).
2. Use the / keys to select Picture from the OSD menu.
3. Navigate to the picture element you wish to adjust.
4. Use the / keys to adjust the sliding scales.
This allows adjustment of brightness, contrast, color temperature, auto configuration, and other image-related settings.
This answer is automatically generated