Instructions For Installation And Connection - Atag FG6011E Instructions For Use, Installation, And Connection

Instructions for installation and connection

Important warnings
• The appliance may only be connected by a service technician authorized by the gas distribution
company or an authorized service center.
• The room in which the appliance is installed must be regularly ventilated.
• Gas type that the appliance is adjusted to by the manufacturer is indicated on the rating plate.
• Before connecting the appliance, make sure that the local requirements for connection (gas type
and pressure) are compatible with the appliance version / adjustment.
• This appliance is not connected to a combustion fumes exhaust system (i.e. a chimney). The
appliance must be installed and connected in compliance with the relevant effective installation
regulations. Special care must be taken to ensure adequate ventilation / aeration.
• The distance between the cooking hob and the kitchen hood should be no less than indicated in
the instructions for kitchen hood installation.
• This appliance is appropriate for installation between two pieces of furniture (class 2/1); it
can be in direct contact with them on both sides. On one side of the appliance, a piece of
kitchen furniture that is higher than the appliance may be installed, if the distance between the
appliance and this piece of furniture is not less than 10 centimeters. In such case, only a piece
of furniture with a height not exceeding that of the cooker may be installed on the other side of
the appliances. Hanging, or wall-mounted kitchen elements should be installed high enough not
to interfere with the work process. The distance between the cooking hob and the kitchen hood
should be no less than 650 mm.
• All other repairs and similar tasks that require the use of any tool whatsoever should only be
carried out by an authorized service technician.
• The user may only perform those tasks that can be carried out without the use of tools.
• The walls and furniture closest to the appliance (fl oor, kitchen back wall, side walls) should be
resistant to temperatures of at least 90°C.
• Mains cords on the back side of the appliance must be secured in such way that it is not in direct
contact with the cooker back wall, as this wall heats up considerably during operation.
70
Leveling the cooker
The cooker has four adjustable feet, two at the front and two at
the back. The feet are accessible, when the cooker drawer is
removed; if required, they may be turned to increase or decrease
the height, until the appliance is not in a completely horizontal
position. The adjustment screws can easily be turned if the
cooker is tilted slightly to redistribute the load.