Removing And Installing A Processor - Clevo W243HUQ Series Service Manual

Disassembly

Removing and Installing a Processor

Figure 8
Processor Removal
Processor Removal Procedure
1. Turn off the computer, turn it over, and remove the battery
a. The CPU heat sink will
2. The CPU heat sink will be visible at point
be visible at point A .
Remove the screws from
3. Loosen the CPU heat sink screws in the order
the CPU heatsink.
4. Grip the heat sink tab and carefully lift the heat sink
b. Grip the heat sink tab
and carefully lift the heat
sink up and off the com-
puter.

4. Heat Sink
• 3 S crews
2 - 12 Removing and Installing a Processor
(Figure 8a).
A
, &
2
3
up and off the computer
4
a.
3
1
A
2
b.
(page 2 - 5) and the component bay cover
(the reverse order as indicated on the label
1
(Figure 8b).
4
(page 2 - 8).
Figure 8a).