9. Replace the bay cover and screws (make sure you reconnect the fan cable before screwing down the bay
cover).
Note that there are four
-
5
fit, before screwing down the bay cover
10. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
cover pins which need to be aligned with slots in the case, to insure a proper cover
8
(Figure
7d).
d.
5
6
7
8
Removing the System Memory (RAM) 2 - 11
Disassembly
Figure 7
RAM Module
Removal (cont'd.)
d. Properly re-insert
the
bay cover pins.