Removing The Keyboard - Clevo W243HUQ Series Service Manual

Removing the Keyboard

1. Turn off the computer, and remove the battery
-
2. Remove screws from the bottom of the computer and use the Eject Pin Tool to carefully push out the key-
1 2
board at point
3
3. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable.
a.
c.
b.
(page 2 - 5),and the component bay cover
3
2
1
4
Figure 13
Keyboard Removal
(page 2 - 8)
a. Remove screws from the
bottom of the computer
and use the Eject Pin
Tool to push out the key-
board at point
b.Carefully lift the keyboard
up.
4. Keyboard
• 2
Removing the Keyboard 2 - 17
Disassembly
3 .

S crews