Removing The Wireless Lan Module - Clevo W24ABL Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, turn it over, and remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cable
4. The Wireless LAN module
4
a.
1
b.
3
2
(page 2 -
on the mainboard
1
, and then remove the screw
2
(Figure 7c) will pop-up, and you can remove it from the computer
c.
d.
5) and the component bay cover
(Figure 7a).
(Figure 7b) .
3
4
Removing the Wireless LAN Module 2 - 11
Disassembly
Figure 7
Wireless LAN
(page 2 - 9).
Module Removal
a. Locate the WLAN.
(Figure 7d).
b. Disconnect
and remove the screw.
c. The WLAN module will
pop up.
d. Remove the Wireless
LAN module.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure

4
4.Wireless LAN Module
• 1 Screw
the cable
7b).