Disassembly
9. Replace the bay cover and screws (make sure you reconnect the fan cable before screwing down the bay
Figure 6
cover).
RAM Module
Note that there are four
Removal (cont'd.)
fit, before screwing down the bay cover
d. Properly re-insert
the
bay cover pins.
10. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
2 - 10 Removing the System Memory (RAM)
-
cover pins which need to be aligned with slots in the case, to insure a proper cover
5
8
(Figure
6d).
d.
5
6
7
8