Table of Contents
Advertisement
Disassembly
Removing the Optical (CD/DVD) Device
Figure 4
Optical Device
1. Turn off the computer, and remove the battery
Removal
2. Locate the RAM & CPU bay cover
3. Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover.
a. Remove the screws.
4. Carefully disconnect the fan cable
b. Remove the cover.
5. Remove the screw at point
c. Remove the screw and
ure 4c
push the optical device
out off the computer at
6. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The
point
8
.
screw holes should line up).
7. Restart the computer to allow it to automatically detect the new device.
a.
b.
1. Component Bay Cov-
er
9. Optical Device
• 5 Screws
2 - 8 Removing the Optical (CD/DVD) Device
, and remove screws
1
, and remove the cover
6
, and use a screwdriver to carefully push out the optical device
7
)
.
3
1
4
5
(page 2 -
5).
-
(Figure 4a
2
5
(Figure 4b
1
c.
2
9
1
6
)
.
).
at point
9
8
7
8
(Fig-
Advertisement
Table of Contents
