6-5
Checking the Airflow
Checking Airflow
•
Make sure there are no objects to obstruct airflow in and out of the server. In
addition, if you are using a front bezel, make sure the bezel's filter is replaced
periodically.
•
Do not operate the server without drives or drive trays in the drive bays. Use
only recommended server parts.
•
Make sure no wires or foreign objects obstruct airflow through the chassis. Pull
all excess cabling out of the airflow path or use shorter cables.
•
The control panel LEDs inform you of system status. See "Chapter 3: System
Interface" for details on the LEDs and the control panel buttons.
Installation Complete
In most cases, the chassis power supply and fans are pre-installed. If you need
to install fans or power supplies, continue to the Systems Fan and Power Supply
sections of this chapter. If the chassis will be installed into a rack, continue to the
next chapter for rack installation instructions.
Chapter 6: Advanced Chassis Setup
6-5