AR8360T AS3X and SAFE Telemetry Receiver
The Spektrum™ AR8360T Receiver
is full range with telemetry, and is
compatible with all Spektrum™
DSM2
and DSMX
®
transmitters.
Perform the setup for the AR8360T
receiver through a compatible
Spektrum Transmitter with Forward
Programming. The Spektrum PC
Programmer can be used for firmware updates.
Table of Contents
Smart Throttle ..............................................................................................4
Specifications ..............................................................................................4
Telemetry ....................................................................................................5
Failsafe ......................................................................................................7
Initial Setup .................................................................................................7
AS3X Reaction Test ......................................................................................9
Advanced Tuning ........................................................................................11
Channel Limitations ....................................................................................15
Flight Log ..................................................................................................16
Range Testing ............................................................................................17
Glossary ....................................................................................................18
Optional Accessories ..................................................................................19
FCC Information .........................................................................................25
IC Information ............................................................................................27
IMPORTANT
: The AR8360T receiver only uses forward programming for the
configuration, do not use the AS3X menu in the main transmitter menu.
WARNING:
motor during the setup procedure. Only install the propeller once the
throttle has been confirmed to operate correctly and the failsafe has been set.
As an additional safety feature, we recommend the throttle cut is enabled.
Throttle cut should be engaged any time the aircraft is powered on and not
in operation. The motor will not rotate when throttle cut is in the ON position.
technology
®
If equipped, the propeller should not be installed on the
EN
3