8. Remove upper cover from lower cover as shown in Figure 3-25.
Figure 3-25. Removing Upper Cover
Upper Cover Installation
1. Install and secure upper cover latches on lower cover
2. Turn computer over to show lower cover.
3. Install and secure five (5) screws (A) in battery bay. Refer to
4. Install and secure seven (7) screws (B), two (2) screws (C), and one (1) screw (D) to lower
cover.
5. Install WLAN cables (E) to cable guides.
6. Turn computer over to show upper cover.
7. Install power board FFC (Flat Flexible Cable) (B) to mainboard connector (C). Refer to
Figure
3-22.
8. Install and secure six (6) screws (A) to upper cover.
9. Install Base door.
10. Install Keyboard.
M2.0x3.0
M2.5x8.0
M2.5x4
Machine Maintenance Procedures
Size
Quantity
5
9
7
(Figure
3-25).
Figure
3-23.
Screw Type
0
3-27