Microphone Failure - Acer Aspire 5350 Service Manual

Microphone Failure

If internal or external Microphones fail, perform the following:
Figure 4-7. Microphone Failure
1. Check that the microphone is enabled. Navigate to Start

and Sound
2. Right click on the Recording tab and select Show Disabled Devices (clear by
default). The microphone appears on the Recording tab.
3. Right click on the microphone and select Enable.
4. Select the microphone then click Properties. Select the Levels tab.
5. Increase the volume to the maximum setting and click OK.
6. Test the microphone hardware:
 Select the microphone and click Configure.
 Select Set up microphone.
 Select the microphone type from the list and click Next.
 Follow the on-screen prompts to complete the test.
7. If the Issue is still not resolved, refer to
4-12
Sound and select the Recording tab.
0

Control Panel
Online Support Information.

Hardware
Troubleshooting