Lcd Panel Removal; Lcd Panel Installation - Acer Aspire 5350 Service Manual

LCD Panel Removal

Prerequisite:
CCD (Charge-Coupled Device) Module Removal
1. Locate LCD panel (B) on module cover. Refer to
2. Remove four (4) screws (C) from module cover.
3. Lift adhesive foil tabs (D) covering LVDS cable (E).
4. Remove panel from module cover.
5. Turn panel over and place face down on a clean surface (Figure 3-55).
Figure 3-55. LCD Panel
6. Remove CCD module cable (A) from panel.
7. Pull back transparent adhesive protector (B) securing LVDS cable (D) to panel.
8. Remove LVDS cable (D) from panel connector (C).

LCD Panel Installation

1. Install LVDS cable (D) to panel connector (C) (
2. Secure transparent adhesive protector (B) to LVDS cable (D) and panel.
3. Install and secure CCD module cable (A) to panel.
4. Place LCD panel onto module cover. Refer to
5. Secure adhesive foil tabs (D) covering LVDS cable (E) to module cover.
6. Install and secure four (4) screws (C) to module cover.
7. Install CCD module.
M2.5x4.0
Machine Maintenance Procedures
B
D
Size
Figure 3-53.
A
C
.
Figure 3-55)
Figure 3-53.
Quantity Screw Type
4
0
0
3-53