5. Starting at ODD module slot (E), separate upper and lower cover.
6. Using a flat plastic tool, work along edges until upper and lower cover are separated.
7. Lift upper cover to remove.
Upper Cover Installation
1. Align upper cover to lower cover.
2. Press along edges to secure all latches.
3. Install and secure three (3) screws (A) to upper cover
4. Connect power board FFC cable (B) and touchpad module FFC cable (C) to mainboard
(Figure 3-17).
5. Install and secure nineteen (19) screws (A) to lower cover
6. Install HDD module.
7. Install keyboard.
ID
Size
A
M2.5*6
3-22
(Figure
(Figure
Quantity
22
Machine Maintenance Procedures
3-17).
3-16).
Screw Type
0