Main Menu Introduction - Magnimage LED-540 User Manual

Main menu introduction

The main menu will show the symbols listed in the table below, please check
its specific meaning in the table below:
Symbols Explanation
>> Press "RIGHT" or"OK"to enter the detail setting page, or operate that directly.
▼ The next page is after this page, press"DOWN"button in the last item of this
page to enter the next page
▲ Before this page is the previous page, press the first project"UP"to enter the
previous page.
In the main MENU, the user can use the "MENU", "UP", "DOWN", "LEFT",
"RIGHT", "OK" the six buttons to select and adjust the each item. Its operation
is fixed pattern, please check the following table:
Operation
Open the main menu
Select the each item
Adjust the parameters
Enter the next level
menu
Performs some specific
functions
Back to the higher level
menu
Confirm operation
Button
Press"MENU" in the un-menu state
Press"UP"or"DOWN" ， When there is"▼"or"▲"symbol on the right of the
item ,there will be paging action.
When there is digital parameter or option on the right of the item, please press
"LEFT" or"RIGHT".
When there is">>"on the right of item, press"RIGHT"or"OK"
When there is">>"on the right of item, press"RIGHT"or"OK"
Press"MENU"
When the reset operation, to avoid the incorrect operation, need to use
the "OK" button to confirm operation
15